Skip to Main Content

Breadcrumb

References

Reference Details

Citation
Hori et al 2008
Author
Hori, H., Nagaoka, Y., Sano, T., and Kutsuna, S.
Title
Iron-induced decomposition of perfluorohexanesulfonate in sub-and supercritical water
Source
Chemosphere
Publication Year
2008
Reference Category
Primary Sources
Reference Type
Peer Reviewed Journals
Source Details
DOI: 10.1016/j.chemosphere.2007.07.015
DOI
10.1016/j.chemosphere.2007.07.015Exit
Non-Targeted Analysis Flag
No

Scope

Open Scope
Treatment Process
Scale
Matrix
Matrix DetailScope Detail
Open ScopeHydrothermal TreatmentLabOtherWater heated to super- and sub-critical points, spiked with PFHS and iron powderPre- and post-concentrations of PFHS for 6 samples with 4 iron concentrations and 3 initial concentrations

Condition

Thermal Treatment Results

Link to Results Record
Analyte
Scope
Condition
Effectiveness (%)
Initial Concentration
Post Concentration
Offgas Concentration
Additional Details
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported2.52 umolEntry 1; Iron amount = 0 mmol; Reaction pressure = 21.2 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported31.1 umolEntry 4; Iron amount = 19.3 mmol; Reaction pressure = 23 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported22.2 umolEntry 3; Iron amount = 9.61 mmol; Reaction pressure = 22.1 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported6.27 umolEntry 6; Iron amount = 9.61 mmol; Reaction pressure = 21.9 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported11.8 umolEntry 5; Iron amount = 9.61 mmol; Reaction pressure = 22 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported21.3 umolEntry 2; Iron amount = 4.81 mmol; Reaction pressure = 21.9 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported40.3 umolEntry 1; Iron type = A, 3 to 5 um; Iron amount = 9.61 mmol; Reaction pressure = 23 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported22.2 umolEntry 2; Iron type = B, <53 um; Iron amount = 9.61 mmol; Reaction pressure = 22.1 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
FHydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reported10.4 umolEntry 3; Iron type = C, <180 um; Iron amount = 9.61 mmol; Reaction pressure = 21.2 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
FHydrothermal Treatment | Lab | Other 380 °C | 6 hour Not reported7.08 umolEntry 1; Iron amount = 0 mmol; Reaction pressure = 23.8 MPa; Results from Table 3; Results for hydrogen and carbon dioxide gas-phase products in Table 3
FHydrothermal Treatment | Lab | Other 380 °C | 6 hour Not reported36.3 umolEntry 2; Iron amount = 9.61 mmol; Reaction pressure = 26.4 MPa; Results from Table 3; Results for hydrogen and carbon dioxide gas-phase products in Table 3
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 5.93 umol2.42 umolEntry 2; Iron amount = 4.81 mmol; Reaction pressure = 21.9 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 5.93 umol0.97 umolEntry 3; Iron amount = 9.61 mmol; Reaction pressure = 22.1 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 1.46 umolNDEntry 6; Iron amount = 9.61 mmol; Reaction pressure = 21.9 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 3.01 umol0.46 umolEntry 5; Iron amount = 9.61 mmol; Reaction pressure = 22 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 5.93 umol0.78 umolEntry 4; Iron amount = 19.3 mmol; Reaction pressure = 23 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 5.93 umol5.48 umolEntry 1; Iron amount = 0 mmol; Reaction pressure = 21.2 MPa; Results from Table 1; Results for hydrogen and carbon dioxide gas-phase products in Table 2
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 5.93 umol4.76 umolEntry 3; Iron type = C, <180 um; Iron amount = 9.61 mmol; Reaction pressure = 21.2 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 5.93 umol0.97 umolEntry 2; Iron type = B, <53 um; Iron amount = 9.61 mmol; Reaction pressure = 22.1 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
PFHxSHydrothermal Treatment | Lab | Other 350 °C | 6 hour 5.93 umol0.6 umolEntry 1; Iron type = A, 3 to 5 um; Iron amount = 9.61 mmol; Reaction pressure = 23 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
PFHxSHydrothermal Treatment | Lab | Other 380 °C | 6 hour 5.93 umol4.14 umolEntry 1; Iron amount = 0 mmol; Reaction pressure = 23.8 MPa; Results from Table 3; Results for hydrogen and carbon dioxide gas-phase products in Table 3
PFHxSHydrothermal Treatment | Lab | Other 380 °C | 6 hour 5.93 umol0.31 umolEntry 2; Iron amount = 9.61 mmol; Reaction pressure = 26.4 MPa; Results from Table 3; Results for hydrogen and carbon dioxide gas-phase products in Table 3
CHF3Hydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reportedNot reported00.3 umolEntry 1; Iron type = A, 3 to 5 um; Iron amount = 9.61 mmol; Reaction pressure = 23 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
CHF3Hydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reportedNot reported00.25 umolEntry 4 - same trial as Entry 3 in Table 1; Iron amount = 9.61 mmol; Reaction pressure = 22 MPa; Results from Table 2; Results for hydrogen and carbon dioxide gas-phase products in Table 2
CHF3Hydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reportedNot reported00.49 umolEntry 2 - same trial as Entry 3 in Table 1; Iron amount = 9.61 mmol; Reaction pressure = 22.1 MPa; Results from Table 2; Results for hydrogen and carbon dioxide gas-phase products in Table 2
CHF3Hydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reportedNot reported00.13 umolEntry 5 - same trial as Entry 4 in Table 1; Iron amount = 9.61 mmol; Reaction pressure = 21.9 MPa; Results from Table 2; Results for hydrogen and carbon dioxide gas-phase products in Table 2
CHF3Hydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reportedNot reported00.4 umolEntry 1 - same trial as Entry 2 in Table 1; Iron amount = 4.81 mmol; Reaction pressure = 21.9 MPa; Results from Table 2; Results for hydrogen and carbon dioxide gas-phase products in Table 2
CHF3Hydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reportedNot reported00.49 umolEntry 2; Iron type = B, <53 um; Iron amount = 9.61 mmol; Reaction pressure = 22.1 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
CHF3Hydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reportedNot reported00.56 umolEntry 3 - same trial as Entry 4 in Table 1; Iron amount = 19.3 mmol; Reaction pressure = 23 MPa; Results from Table 2; Results for hydrogen and carbon dioxide gas-phase products in Table 2
CHF3Hydrothermal Treatment | Lab | Other 350 °C | 6 hour Not reportedNDNot reportedEntry 3; Iron type = C, <180 um; Iron amount = 9.61 mmol; Reaction pressure = 21.2 MPa; Results from Table 4; Results for hydrogen and carbon dioxide gas-phase products in Table 4
CHF3Hydrothermal Treatment | Lab | Other 380 °C | 6 hour Not reportedNot reportedNot reportedEntry 1; Iron amount = 0 mmol; Reaction pressure = 23.8 MPa; Results from Table 3; Results for hydrogen and carbon dioxide gas-phase products in Table 3
CHF3Hydrothermal Treatment | Lab | Other 380 °C | 6 hour Not reportedNot reported3.66 umolEntry 2; Iron amount = 9.61 mmol; Reaction pressure = 26.4 MPa; Results from Table 3; Results for hydrogen and carbon dioxide gas-phase products in Table 3
Contact Us to ask a question, provide feedback, or report a problem.
Last updated on October 15, 2024.