Condition

Reference: Krug, J. D., Lemieux, P. M., Lee, C. W., Ryan, J. V., Kariher, P. H., Shields, E. P., ... and Linak, W. P. (2022) Combustion of C1 and C2 PFAS: Kinetic modeling and experiments - Journal of the Air & Waste Management Association
Scope: Incineration | Pilot | Other
Treatment Temperature (°C): 825
Treatent Time: 3
Time Units: Second
Treatment Details: Port 12; 40 kW loading experiment; The model assumes initial adiabatic flame temperature (2071 °C) and a linear temperature decay to Port 1. PFAS introduced with the natural gas or combustion air (t=0 sec) experience the full temperature profile (Figure 3) and flame chemistry before being analyzed by FTIR at Port 18 (t~7.4 sec). However, PFAS introduced at Ports 4‐12 experienced reduced temperatures, residence times, and exposure to flame chemistry.

row(s) 1 - 2 of 2

Link to Results Record	Analyte	Effectiveness (%)	Initial Concentration	Post Concentration	Offgas Concentration	Additional Details
	CHF3	94.3%
	C2F6	≈0%				Due to measurement uncertainty, the calculated DE was slightly negative

row(s) 1 - 2 of 2

Breadcrumb