Condition

Reference: Watanabe, N., Takemine, S., Yamamoto, K., Haga, Y., and Takata, M. (2016) Residual organic fluorinated compounds from thermal treatment of PFOA, PFHxA and PFOS adsorbed onto granular activated carbon (GAC) - Journal of Material Cycles & Waste Management
Scope: GAC Reactivation | Lab | Treatment Media: GAC spiked with PFOA
Treatment Temperature (°C): 900
Treatent Time: 10
Time Units: Minute
Treatment Details: Treatment time representative of time in furnace; exposed to nitrogen gas for 2 minutes at 1.5 L/min

row(s) 1 - 3 of 3

Analyte	Effectiveness (%)	Initial Concentration	Post Concentration	Additional Details
PFOA	≈8%	10 mg/g	Not detected	No PFASs remained in either quartz tube or GAC; quantification limit = 0.05 ug F; No VOF recovered in Tenax TA tube; quantification limit = 0.3 ug F; data interpolated from Fig. 2
PFOA	≈53%	10 mg/g	Not detected	No PFASs remained in either quartz tube or GAC; quantification limit = 0.05 ug F; No VOF recovered in Tenax TA tube; quantification limit = 0.3 ug F; data interpolated from Fig. 2
PFBA	≈0.03%	0 mg/g		No PFASs remained in either quartz tube or GAC; quantification limit = 0.05 ug F; No VOF recovered in Tenax TA tube; quantification limit = 0.3 ug F; data interpolated from Fig. 2

row(s) 1 - 3 of 3

Breadcrumb