Condition

Reference: Krug, J., Lemiux, P.M., Lee, C-W., Ryan, J.V., Kariher, P., Shields, E., Wickersham, L., Denison, M., Davis, K., Swensen, D., Burnette, R., Wendt, J.O.L., and Linak, W.P. (2021) Combustion of C1 and C2 PFAS: Kinetic Modeling and Experiments - 38th International Conference on Thermal Treatment Technologies and Hazardous Waste Combustors
Scope: Incineration | Pilot | Other: Pure PFAS
Treatment Temperature (°C): 1090
Treatent Time: 5
Time Units: Second
Treatment Details: Port 4. PFAS introduced with the natural gas or combustion air (t=0 sec) experience the full temperature profile (Figure 3) and flame chemistry before being analyzed by FTIR at Port 18 (t~7.4 sec). However, PFAS introduced at Ports 4‐12 experienced reduced temperatures, residence times, and exposure to flame chemistry. For example, CHF3 introduced at Port 12, was exposed to peak temperatures of ~830 °C (1526 °F) before being analyzed by FTIR at Port 18 ~3 sec later.

row(s) 1 - 2 of 2

Link to Results Record	Analyte	Effectiveness (%)	Initial Concentration	Post Concentration	Offgas Concentration	Additional Details
	CHF3	>99%				Table 2. Measured FTIR concentration was not 3x higher than residual indicating very little of the compound remaining.
	C2F6	>99%				Table 2. Measured FTIR concentration was not 3x higher than residual indicating very little of the compound remaining.

row(s) 1 - 2 of 2

Breadcrumb