Condition

Reference: Krug, J. D., Lemieux, P. M., Lee, C. W., Ryan, J. V., Kariher, P. H., Shields, E. P., ... and Linak, W. P. (2022) Combustion of C1 and C2 PFAS: Kinetic modeling and experiments - Journal of the Air & Waste Management Association
Scope: Incineration | Pilot | Other
Treatment Temperature (°C): 2071
Treatent Time: 7.4
Time Units: Second
Treatment Details: At flame; Natural Gas Port; 45 kW loading experiment; The model assumes initial adiabatic flame temperature (2071 °C) and a linear temperature decay to Port 1. PFAS introduced with the natural gas or combustion air (t=0 sec) experience the full temperature profile (Figure 3) and flame chemistry before being analyzed by FTIR at Port 18 (t~7.4 sec). However, PFAS introduced at Ports 4‐12 experienced reduced temperatures, residence times, and exposure to flame chemistry.

row(s) 1 - 6 of 6

Analyte	Effectiveness (%)	Additional Details
CF4	89.5%
CHF3	>99%
C2F6	>99%
CF4	82.6%	At combust air port; conditions likely similar to Natural Gas port (perhaps slightly reduced temp and exposure time)
CHF3	>99%	At combust air port; conditions likely similar to Natural Gas port (perhaps slightly reduced temp and exposure time)
C2F6	>99%	At combust air port; conditions likely similar to Natural Gas port (perhaps slightly reduced temp and exposure time)

row(s) 1 - 6 of 6

Breadcrumb